Adhesive Pipe Insulation Tape Anti Corrosion Protection Materials Pipe Coating Tapes

Product Name

Pipe insulation wrapping adhesive tape black or white color  as corrosion protection materials

Usage

Corrosion protection for gas, oil ,water steel pipe

Thickness

15 mils, 20 mils, 25 mils, 30  mils, 35 mils, 40 mils, 60 mils

Length

100 ft, 200ft, 400 ft, 600 ft, 800 ft

Width

50 mm, 100 mm, 150 mm, 200 mm, 230 mm, 300 mm, 450 mm

Compare to

Berryplastic

Feature

Excellent adhesion to a wide range of substrates found, including concrete and steel piping.

Compatible with common pipe coatings.

Endures extremes of heat and cold.

Excellent resistance to cathodic disbondment.

High water and vapour impermeability.

Material

Polyethylene and butyl rubber

Our Brand

XUNDA

Application

Prepare surfaces by removing all loose scale, rust or other foreign matter by grit blasting or wire brush. Surface must be clean, dry and free of grease.Apply thin film of Butyl Primer to all surfaces to be wrapped and allow to dry. Peel back interleaving and apply adhesive side of the tape to the surface and press down. Apply the tape spirally with enough tension to make it conform. Remove interleaving as wrapping proceeds. Overlap each turn by at least 1" or 55% to achieve double thickness.

Irregular surfaces such as valves, flanges, etc.